30” Heavy Duty Engine Lathe - GTD-30
Location:Boca Raton, FL
Description
products | GANESH | GTD-30
GTD-30
Specifications
| Manufacturer | Ganesh |
| Model | 30” Heavy Duty Engine Lathe |
| Condition | New |
| Swing over Bed | 29.92″ | 760 mm |
| Swing over Cross Slide | 19.69″ | 500 mm |
| Swing thru Gap | 40.55″ | 1030 mm |
| Width of Gap (measured from spindle nose) | 12″ | 305 mm |
| Bed Width | 16.54″ | 420 mm |
| Spindle Motor Horsepower | 15 HP | 11.5 kw |
| Spindle Bore | 4 1/8″ | 105 mm |
| Spindle Nose | A2 – 11 | A2 – 11 |
| Spindle taper in Spindle Nose | MT-7 | MT-7 |
| Spindle taper reduction sleeve provided | MT-5 | MT-5 |
| Spindle Max Weight Capacity (Chuck Only) | 1,100 lbs | 500 kgs |
| Spindle Max Weight Capacity (Chuck and Tailstock) | 2,200 lbs | 1000 kgs |
| Spindle Max Weight Capacity (Chuck, Steady Rest & Tailstock) | 4,400 lbs | 2000 kgs |
| Cross Slide Travel | 15.75″ | 400 mm |
| Carriage Width | 26.38″ | 670 mm |
| Compound Rest Travel | 9.45″ | 240 mm |
| Cutting Tool Height Maximum | 1.0″ | 25 mm |
| Quill Diameter | 3.15″ | 80 mm |
| Quill Stroke | 7.87″ | 200 mm |
| Quill Taper | MT-5 | Morse Taper #5 |
| Quill Tange Drive and drift-slot for tailstock | included | included |
| Tailstock Body set-over adjustment | ±1/2″ | ±13 mm |
| Lead screw diameter & pitch | 1.77″ x 2 TPI |
| Thread Cutting Range – 36″ pitches | 2 – 28 TPI |
| Thread Cutting Range – 65 metric pitches | 0.8 – 14 mm |
| Thread Cutting Range – 36 diametral pitches | 4 – 56 D.P. |
| Thread Cutting Range – 22 module pitches | 0.5 – 7 M.P. |
| Feeds – Longitudinal | 0.0019″ – 0.027″ / rev. 0.05 – .7 mm / rev |
| Feeds – Cross | 0.00098″ – 0.0137″/ rev. 0.025 – 0.35 mm / rev. |
| Feed shaft stop control | 4 adjustable automatic feed stops to disengage the longitudinal feed |
| Feed Rod Diameter | 1.26″ (32 mm) |
| Connected Load – 12 kw | 10 kVA / 220 vac / 42 amps / (440 vac optional) |
| Rapid Traverse Motor | 1/4 HP | 0.1875 kw |
| Coolant Motor / Coolant Tank Capacity | 1/8 HP / 11 gal | 40 liters |