20” Heavy Duty Engine Lathe - GTW-20
Location:Boca Raton, FL
Description
products | GANESH | GTW-20
GTW-20
Specifications
| Manufacturer | Ganesh |
| Model | 20” Heavy Duty Engine Lathe |
| Condition | New |
| Swing over Bed | 20″ | 510 mm |
| Center Height | 10″ | 255 mm |
| Swing over Cross Slide | 13″ | 330 mm |
| Swing thru Gap | 26 3/8″ | 680 mm |
| Length of Gap in front of D1-8 face plate | 7 1/16″ | 180 mm |
| Bed Casting – width / height | 16 1/8″ / 12 7/32″ | 400 mm / 310 mm |
| Spindle Motor Horsepower | 10 HP 3 Phase |
| Spindle Bore | 3 1/8″ | 80 mm |
| Spindle Nose | D1-8 Cam lock |
| Spindle taper in Spindle Nose | MT-7 | Morse Taper #7 |
| Spindle taper reduction sleeve provided | MT-7 to MT-5 |
| Cross Slide Travel | 12 1/2″ | 320 mm |
| Cross Slide Width | 7 3/32″ | 180 mm |
| Cross Slide Lead Screw Pitch | .200″ / rev |
| Cross Slide Resolution per division | 0.001″ | on diameters |
| Carriage Lead Screw Diameter | 1 1/2″ | 38 mm |
| Carriage Lead Screw Pitch | 4 TPI | 6 mm pitch |
| Feed Rod Dimensions | 7/8″ hexagon | 23 mm hexagon |
| Compound Top Slide Travel | 10″ | 255 mm |
| Compound Top Slide Width | 4 11/32″ | 110 mm |
| Cutting Tool Height Maximum | 1.0″ x 1.0″ | 25 mm x 25 mm |
| Quill Diameter | 2-15/16″ | 255 mm |
| Quill Stroke | 6 5/16″ | 160 mm |
| Quill Taper | MT-5 | Morse Taper #5 |
| Quill Tang Drive and Drift-Slot for Tailstock | included |
| Tailstock Body set-over adjustment | ±0.04″ | ±1 mm |
| Leadscrew Diameter / Pitch | 1 1/2″ / 4 TPI | 38 mm / 6 mm pitch |
| Thread Cutting Range – 60″ pitches | 2 – 112 TPI |
| Thread Cutting Range – 60 metric pitches | 0.2 – 14 mm |
| Thread Cutting Range – 50 diametral pitches | 4 – 112 M.P. |
| Thread Cutting Range – 50 module pitches | 0.2 – 7 M.P |
| Feeds – Longitudinal – 50 Feeds | 0.0014″ – 0.0387”/rev. (0.037 – 1.04 mm / rev) |
| Feeds – Cross – 50 Feeds | 0.0007″ – 0.01935″/rev. (0.0185 – 0.52 mm/ rev) |
| Feed stop shaft | 4 adjustable automatic feed stops to disengage the longitudinal feed |
| Power Requirements | 220 vac, 3-Phase, 30 amps |
| Coolant System | 1/8-HP Pump Motor, 5-gallon (20L) tank capacity |