26” Heavy Duty Engine Lathe - GTW-26
Location:Boca Raton, FL
Description
products | GANESH | GTW-26
GTW-26
Specifications
| Manufacturer | Ganesh |
| Model | 26” Heavy Duty Engine Lathe |
| Condition | New |
| Swing over Bed | 26″ | 660 mm |
| Center Height | 13″ | 330 mm |
| Swing over Cross Slide | 18 1/16″ | 460 mm |
| Swing thru Gap | 33 1/4″ | 845 mm |
| Length of Gap in front of D1-11 face plate | 6 1/2″ | 165 mm |
| Bed Width | 16 1/8″ | 400 mm |
| Spindle Motor Horsepower | 15 HP | 12 kw |
| Spindle Bore | 4 1/8″ | 105 mm |
| Spindle Nose | D1-11 Camlock | A1-11 optional |
| Spindle taper in Spindle Nose | MT-8 | Morse Taper #8 |
| Spindle taper reduction sleeve provided | MT-5 | MT-8 to MT-5 |
| Spindle Max Weight Capacity (Chuck Only) | 660 lbs | 300 kgs |
| Spindle Max Weight Capacity (Chuck and Tailstock) | 1,650 lbs | 750 kgs |
| Spindle Max Weight Capacity (Chuck, Steady Rest & Tailstock) | 3,300 lbs | 1,500 kgs |
| Cross Slide Travel | 14.96″ | 380 mm |
| Cross Slide Width | 7 3/32″ | 180 mm |
| Cross Slide lead screw pitch | .200″ / rev |
| Cross Slide resolution per division | 0.001″ | on diameters |
| Carriage Lead Screw Diameter | 1 1/2″ | 38 mm |
| Carriage Lead Screw Pitch | 4 TPI | 6 mm pitch |
| Compound Top Side Travel | 10″ | 255 mm |
| Compound Top Slide Width | 4 11/32″ | 110 mm |
| Cutting Tool Height Maximum | 1.0″ x 1.0″ | 25 mm x 25 mm |
| Quill Diameter | 2 15/16″ | 75 mm |
| Quill Stroke | 6 5/16″ | 160 mm |
| Quill Taper | MT-5 | Morse Taper #5 |
| Tailstock body set-over adjustment | ±0.04″ | ±1 mm |
| Thread Cutting Range – 60 inch pitches | 2 –112 TPI | 2 –112 TPI |
| Thread Cutting Range – 60 metric pitches | 0.2 – 14 mm | 0.2 – 14 mm |
| Thread Cutting Range – 50 diametral pitches | 4 – 112 D.P. | 4 – 112 D.P. |
| Thread Cutting Range – 50 module pitches | 0.2 – 7 M.P. | 0.2 – 7 M.P. |
| Feeds – Longitudinal – 50 Feeds | 0.0014″ – 0.0387″/ rev. (0.037 – 1.04 mm / rev) |
| Feeds – Cross – 50 Feeds | 0.0007″ – 0.01935″/rev. (0.0185 – 0.52 mm/ rev) |
| Coolant System | 1/8 HP Pump Motor / 5 Gallon (20 L) Tank Capacity |
| Power Requirements | 220 vac / 3 Phase / 40 amps (440 vac optional) |