44” – 55” Heavy Duty Big Bore Lathes - GTD-44HL
Location:Boca Raton, FL
Description
products | GANESH | GTD-44HL
GTD-44HL
With Valley Financial Services
Machine Specifications
Capacity & Dimensions
Swing over Bed
44″
1,120 mm
Swing over Cross Slide
31.89″
810 mm
Swing thru Gap
61″
1,550 mm
Width of Gap (measured from spindle nose)
22.05″
560 mm
Distance between Centers (Dependent upon bed selected)
59″- 314.9″
1,500 – 8,000 mm
Bed width (a 32″ wide bed GTD-44HK Heavy-Duty version is optional)
24″
610 mm
Spindle
Spindle Bore (9″, 12″ & 15″ spindle bores optional)
6″
152 mm
Spindle Nose
A2-11
A2-15 & A2-20 optional
Spindle taper in spindle nose
MT-7
Spindle center height to base
49″
1,245 mm
Spindle Motor Horsepower
30-HP
Spindle speeds – 6″ Bore = 16-speeds from 4 – 420 rpm Larger Spindle Bores = 12-speeds (High / Low Speed Ranges)
Specifications
| Manufacturer | Ganesh |
| Model | 44” – 55” Heavy Duty Big Bore Lathes |
| Condition | New |
| Swing over Bed | 44″ | 1,120 mm |
| Swing over Cross Slide | 31.89″ | 810 mm |
| Swing thru Gap | 61″ | 1,550 mm |
| Width of Gap (measured from spindle nose) | 22.05″ | 560 mm |
| Distance between Centers (Dependent upon bed selected) | 59″- 314.9″ | 1,500 – 8,000 mm |
| Bed width (a 32″ wide bed GTD-44HK Heavy-Duty version is optional) | 24″ | 610 mm |
| Spindle Bore (9″, 12″ & 15″ spindle bores optional) | 6″ | 152 mm |
| Spindle Nose | A2-11 | A2-15 & A2-20 optional |
| Spindle taper in spindle nose | MT-7 |
| Spindle center height to base | 49″ | 1,245 mm |
| Spindle Motor Horsepower | 30-HP |
| Workpiece weight limit when held by chuck only | 4,409 lbs. | 2,000 kgs |
| Workpiece weight limit when held by chuck and tailstock | 13,227 lbs. | 6,000 kgs |
| Workpiece weight limit held by chuck, steady rest & tailstock | 17,636 lbs. | 8,000 kgs |
| Cross Slide Travel | 20.87″ | 530 mm |
| Carriage Slide Width | 11.81″ | 300 mm |
| Width of Carriage | 31.10″ | 790 mm |
| Compound Rest Travel | 14.57″ | 370 mm |
| Cutting Tool Height Maximum | 1.26″ x 1.26″ | 32 X 32 mm |
| Quill Diameter (5.9″ diameter optional) | 4.92″ | 125 mm |
| Quill Stroke | 11.8″ | 300 mm |
| Quill advance – 2 speed ratios | 1:1 and 5:1 | 5X Thrust Force Multiplier |
| Quill Taper | MT-6 | MT-7 Optional |
| Tailstock body set-over adjustment | ±0.4″ | ±10 mm |
| Lead screw diameter | 2.36″ x 2 TPI | 60 mm, 12 mm Pitch |
| Thread Cutting Range – 70″ pitches | 0.25 – 30 TPI |
| Thread Cutting Range – 62 metric pitches | 1 – 120 mm |
| Thread Cutting Range -70 diametral pitches | 1 – 120 D.P. |
| Thread Cutting Range – 53 module pitches | 0.25 – 30 M.P. |
| Feed Rod Diameter | 1.26″ | 32 mm |
| Feeds – Longitudinal | 0.0028″ – 0.34 / rev | 0.072 – 8.68 mm / rev |
| Feeds – Cross Sign | 0.0014″ 0.17″ / rev | 0.036 – 4.34 mm / rev |
| Connected load – 86 Amps Full Load | Wired 440 vac (220 / 440 vac motor) | 220/440 vac motor |
| Rapid traverse motor for cross & longitudinal motion | 1-HP | 0.75 kW |
| Coolant motor | 0.25-HP | 0.2 kW |