30” Heavy Duty CNC Big Bore Lathe - GTW-30 CNC
Location:Boca Raton, FL
Description
products | GANESH | GTW-30 CNC
GTW-30 CNC
Specifications
| Manufacturer | Ganesh |
| Model | 30” Heavy Duty CNC Big Bore Lathe |
| Condition | New |
| Swing over Bed | 30″ | 760 mm |
| Turning Diameter (in front of cross slide w/8 station turret turning tool | 22″ | 560 mm |
| Swing over Cross-Slide (turning diameter over cross-slide) | 19″ | 480 mm |
| Center Height | 15″ | 380 mm |
| Bed width of ways | 18″ | 460 mm |
| Bed Casing Height | 15.75″ | 400 mm |
| Spindle Motor Horsepower (Fanuc 15 Kw – 18 Kw) | 30 HP | (25 HP 30 min rated) |
| Spindle Speeds | 10 – 1,000 RPM |
| Spindle Gear Ranges – 2 automatically selected gear ranges | L = 30 – 300 RPM | H = 10 – 1000 RPMS |
| Spindle Bore (10″ bore optional) | 6.69″ | (170 mm) |
| Spindle Nose (front & rear) / bearing | A2-11 / Taper Roller Bearings |
| Spindle Torque for 6 5/8″ bore – low gear / high gear | 1,180 / 346 ft lbs | (1,600 / 470 Nm) |
| Big-Bore Spindle Option – Bore Size | 10″ (255 mm) | A2 – 15 spindle |
| Big Bore Spindle Speeds | 18 – 600 RPM in 2 ranges |
| Big-Bore Spindle Gear Ranges – 2-automatically selected gear ranges | Low 18-186 rpm / High 60-600 rpm |
| Big Bore Spindle Torque for 10″ bore – low gear/high gear | 1,475 / 442 ft lbs | (2,000 / 600 Nm) |
| Rapid Traverse Feedrate X & Z | 394 IPM | (10 m / min) |
| X-Axis Cross Slide Travel | 19 5/8″ | (500 mm) |
| X-Axis Ballscrew Diameter / Servo Motor Power | 1.25″ (32 mm) | 2.0 HP (1.6 kw) |
| Z-Axis Ballscrew Diameter / Servo Motor Power | 2″ (50 mm) | 4.0 HP (2.9 kw) |
| X-Axis Thrust | 3,020 lbs | (1,370 kgf) |
| Cross Slide Dimensions W x L | 39″ x 10″ | (1,000 mm x 258 mm) |
| Minimum input unit | 0.0001″ | (0.001 mm = 40 millionths) |
| Tool stations – any combination of ID / OD tooling / Index time | 8 stations |
| OD Tooling (additional ID & OD tool holders in stock) | 1″ tools w/ 8 tool clamps provided |
| ID Tooling (40mm when specified for metric users) | 4 ID (1.5″ bore) holders provided |
| Quill Diameter | 4.92″ | (125 mm) |
| Quill Stroke (manual quill advance, hydraulic optional) | 7.87″ | (200 mm) |
| Quill Taper | MT-6 | Morse Taper #6 |
| Power Requirements – FANUC 0i – TF control, motors & drives | 30 kVA / 220 vac / ±5% |
| Hydraulic Motor Power | 2 HP |
| Hydraulic Pressure | 435 PSI / Mobil #32 oil |
| Coolant Pump | 3/4 HP |